Detailed Product Description
They are non-expansive, stress-free anchors, and can be installed at closer center and edge spacings without reducing concrete load bearing capacity. Dispensing tools: 1) Mixing nozzles 2) Plastic anchoring screens 3) Mixing nozzles and retaining nuts: mixing nozzles with integrally molded retaining nut 4) Suggested specifications: anchoring adhesive shall be a two-component acrylic based system supplied in manufacturer's standard side-by-side or coaxial cartridge and dispensed through a static-mixing nozzle supplied by the manufacturer compressive yield strength after 24 hours cure Features: 1) Surfaces to receive epoxy must be clean 2) For installations in or through standing water, see adhesive anchorsapplication guidelines for details 3) The base material temperature must be 40&176;F or above at the time of installation 4) For best results, material temperature should between 70 - 80oF at the time of application 5) Cartridges should not be immersed in water to facilitate warming. To warm cold material, the cartridges should be stored in a warm, uniformly heated area or storage container for a sufficient time to allow epoxy to warm completely 6) Mixed material in nozzle can harden in 5 - 7 minutes at a temperature of 40oF or above
View